The full guide to the Kretrum 12-colour refills
Kretrum’s 12-colour pack is a compact, named palette of 1.75 mm PLA for hot 3D pens: you know before you buy that you’ll get peach, gold, sky blue and nine everyday shades. It suits anyone who plans projects by colour. The trade-off is that Kretrum doesn’t publish the length per colour, so you can’t judge from the listing how far it will go.
Key specifications
| Material | PLA, 1.75 mm |
|---|---|
| Colours | 12: peach, black, orange, green, yellow, red, white, grey, purple, pink, sky blue, gold |
| Length per colour | Not published by the manufacturer |
| Printing temperature | Not published by the manufacturer |
| Fits | Most pens and printers that take 1.75 mm filament, according to the listing |
| Not for | 3Doodler Start and Start+ |
Who it suits — and who should pick something else
It’s a sensible buy if you:
- Draw with a hot pen that takes 1.75 mm PLA, such as the LIHUACHEN RPC200B button pen, the SCRIB3D P1 or the MYNT3D Super.
- Want to know your colours in advance. Unlike a random mix, every shade is listed.
- Need skin tones and a metallic-look accent: peach and gold are both in the twelve.
Look elsewhere if:
- You own a 3Doodler Start or Start+. Those pens take low-temperature Start plastic, not 1.75 mm PLA.
- You want to compare value by length. The SCRIB3D 20-colour refill pack publishes about 4.9 m per colour.
What’s in the box
Twelve colours of 1.75 mm PLA filament: peach, black, orange, green, yellow, red, white, grey, purple, pink, sky blue and gold. Kretrum doesn’t state the length of each colour, and the listing doesn’t mention a pen or accessories.
How to use it
- Heat your pen in its PLA mode and wait for the ready light. The LIHUACHEN RPC200B sets its 190–210 °C automatically; the SCRIB3D P1 lets you choose 160–210 °C.
- Cut the filament end straight across. SCRIB3D’s manual explains that a flat end lets the incoming strand push the previous one through, and that a ragged tip can jam.
- Feed the strand into the back of the pen while the feed button runs, until the pen grips it and plastic flows from the nozzle.
- Draw a test line before the real piece. If it bubbles, lower the temperature a step, as your pen’s manual allows.
Planning a project with twelve colours
A small palette goes further when you decide the job of each colour before you start:
- Structure: white, grey or black for bases, frames and hidden infill, so the brighter colours stay for what shows.
- Faces and figures: peach for skin, black for eyes and outlines, pink for cheeks.
- Landscapes: sky blue and white for sky and water, green and yellow for grass and flowers.
- Accents: gold for crowns, trims and clasps. Our guide to 3D pen jewellery has pendants and rings that suit it.
Draw flat parts on our printable 3D pen templates first, then join them into a 3D shape: it keeps each colour where you want it.
Using up the last few centimetres
Short ends need not go in the bin. 3Doodler’s FAQ notes that extrusion can slow as one strand runs out, and that putting the next strand in behind it and giving it a gentle nudge usually keeps the plastic moving. So when a colour is nearly finished, feed in a plain colour behind it and use the changeover for a part that won’t show. Offcuts also suit small fixes: our guide to repairing plastic with a 3D pen explains how. Keep spare lengths sealed: SUNLU recommends a sealed bag with desiccant for PLA, in a cool, dry place out of direct sunlight.
Can it go in a 3D printer?
The listing says the filament fits printers that take 1.75 mm filament, and the diameter is right. Printers, though, are normally fed from a spool, and the length per colour here isn’t published. For printing, a full spool such as the SUNLU PLA Filament is the practical choice, with SUNLU’s published diameter tolerance and settings.
How it compares
- Kretrum 12-Colour PLA Refills: 12 named colours including peach and gold; length per colour not published.
- SCRIB3D PLA Refills: 20 colours, about 4.9 m each and about 100 m in total; 160–210 °C; each colour vacuum packed.
- Helweet 20-Colour PLA Refills: 20 colours, 3 m each, 60 m in total; colours chosen at random.
Common questions
How long is each colour in the Kretrum 12 pack?
Kretrum doesn’t publish the length per colour. If length matters, compare packs by total metres where it is stated, such as SCRIB3D’s 100 m or Helweet’s 60 m.
Does it work with the 3Doodler Start+?
No. The 3Doodler Start and Start+ take 3Doodler’s low-temperature Start plastic only. Kretrum sells a separate pack for those pens.
What temperature should the pen be set to?
Kretrum doesn’t publish one, so use your pen’s PLA setting and adjust from there. On a pen with manual control, lower the heat if the plastic bubbles and raise it if the motor struggles.
Which colours are included?
Peach, black, orange, green, yellow, red, white, grey, purple, pink, sky blue and gold. There are no transparent or fluorescent shades in this pack.
Still choosing a pen to go with it? See our 3D pens ranked by use.
Specifications as published by Kretrum on its official listing, checked November 2026. Where a figure isn’t published, we say so.


