Accessories & Tools

Accessories for 3D pens and printers, in three groups: mats, templates and cases for pens; a filament dryer and finishing tools for filament printers; and wash-and-cure stations for resin. Each listing says which machines it suits, and the guide below the grid helps you match accessory to machine.

7 products

  • Secure checkoutYou pay on Amazon
  • Delivery & returnsShown and handled on Amazon
  • Specs checkedAgainst the maker’s own pages
  • IndependentNo brand pays for placement

Accessories for 3D pens and printers: what earns a place

The kit in this collection falls into three groups: protection and storage for 3D pens, care for filament printers and their prints, and the wash-and-cure stage that every resin print goes through. None of it is decoration. Each item either protects a surface or a finger, keeps material in good condition, or finishes a part properly. Start from the machine you own, then pick the group that matches it.

How to choose accessories

Match the accessory to your machine

A wash station sized for a 7-inch resin printer won't take parts from a 10-inch one, and a pen case sold for slim pens may not close on a bulky one. Check the "fits" line on each product page against your own model before anything else.

For pens, check the heat rating of the mat

A drawing mat has to cope with the nozzle temperatures your pen uses. AQTAQ rates its silicone mat at 220–260 °C, which covers PLA and ABS pen temperatures. Our guide to surfaces for 3D pen drawing explains why wood, paper and plastic tablecloths are poor choices.

For filament, think about moisture

Filament that has absorbed moisture from the air can print with bubbles, stringing or a rough finish. A dryer heats the spool to drive that moisture out, and the better ones show the humidity so you know when to stop. Read whether you need a filament dryer before buying one; airtight storage is sometimes enough.

For resin, size the station to the printer

Wash-and-cure stations are sold by the printer size they serve. Compare the station's largest wash size with your printer's build volume, and check its height against the shelf where it will sit. Whatever liquid you wash in carries uncured resin afterwards and must never go down the drain.

For finishing, buy once and keep it together

Removing prints, trimming supports and clearing a nozzle all need small, specific tools. A single kit in a compartment case saves hunting for the right needle when a nozzle blocks.

Which accessory for whom

3D pen accessories

AQTAQ 3D Pen Starter Kit: for a new pen owner who wants a proper work surface. It brings a washable 45 × 28 cm silicone mat, 40 templates on 20 double-sided sheets with a transparent drawing board, four finger guards in two sizes and 50 m of PLA in ten colours. The pen is not included.

3Dmate PLA Refill Kit: for someone who already has a hot pen and wants plenty of plastic as well as a mat. About 110 m of 1.75 mm PLA in standard, transparent, metallic and fluorescent finishes, plus a silicone mat, a stencil book and four finger guards.

Lebakort Hard Case: for pens that travel to school, clubs or holidays. A zipped nylon-over-EVA shell with an anti-static lining, mesh pockets for filament and a wrist strap. The seller says it fits the SCRIB3D P1, the MYNT3D Super and pens of similar size; check the length of any other pen first, and let the nozzle cool before packing it.

Filament printer accessories

SUNLU FilaDryer S2: for anyone printing PETG or TPU, or living in a damp house. It holds one spool, heats from 35 to 70 °C on a timer of 1 to 99 hours and shows live humidity. It doubles as a spool holder, feeding the printer while it dries. Use the drying temperature on your filament's own data sheet; SUNLU's presets are starting points.

Creality 3D Printer Tool Kit Pro: for owners of any filament printer. The 74 pieces include plastic and metal spatulas, a deburring tool, files, tweezers, nozzle-cleaning needles and 34 screwdriver bits. The blades and needles are sharp, so the case belongs out of children's reach.

Resin wash and cure stations

Anycubic Wash & Cure 3: for compact resin printers of 7.3 inches and below, such as the Anycubic Photon Mono 4. It washes parts up to 165 × 100 × 180 mm, has a two-height basket that saves alcohol and adds a gooseneck light for touch-up curing. It is too small for 10-inch printers.

Elegoo Mercury Plus V3.0 Wash & Cure Station: for larger resin printers such as the Elegoo Saturn 4 Ultra 16K. A 7.5-litre tank, a basket for parts up to 230 × 135 × 260 mm and a turntable with 24 UV LEDs. Elegoo says the cover blocks 99.9 % of UV and curing stops when it is lifted. It stands 41.3 cm tall and weighs 6.2 kg.

What you'll need alongside

Common questions

Do resin prints need a wash and cure station?

Every resin print needs washing and curing, but a station is not the only way to do it. A station keeps both steps in one place with a timer and a UV cover, which is tidier and easier to repeat safely.

Which wash station fits a 10-inch resin printer?

Of the two here, the Elegoo Mercury Plus V3.0, whose basket takes parts larger than the Saturn 4 Ultra 16K can print. Anycubic sells the Wash & Cure 3 for printers of 7.3 inches and below.

Does a 3D pen really need a silicone mat?

It is the one accessory worth buying with the pen. Hot plastic sticks to wood and can melt plastic table covers, while lines peel cleanly off silicone.

Can a filament dryer stay connected while printing?

The SUNLU FilaDryer S2 can: it has a filament outlet and works as a spool holder, so the printer draws filament from it during a print.