Heads up: we research and compare the products we recommend, and we only link to gear we would consider buying ourselves. When you buy through links on this page we may earn a commission, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
Elegoo Water Washable Resin 2.0, 1 kg
Description
Water-washable resin takes the alcohol bath out of resin printing: prints are rinsed in water, then cured as usual. Elegoo’s version 2.0 comes in a 1 kg bottle, with a thinner formula that the maker says helps with fine, complex models.
Key specifications
| Type | Water-washable photopolymer resin |
|---|---|
| Wavelength | 405 nm |
| Quantity | 1,000 g |
| Cleaning | Water, no isopropyl alcohol needed, according to Elegoo |
| Works with | Most MSLA, LCD and DLP printers using 405 nm light, according to Elegoo |
| Colour | Chosen on the listing |
Worth knowing before you buy
- Water-washable doesn’t mean harmless: uncured resin still irritates skin, so wear nitrile gloves and work in a ventilated room.
- The rinse water carries uncured resin. Don’t pour it down the sink: let it cure in sunlight or under UV first.
Specifications as published by Elegoo on its official listing, checked October 2026. Where a figure isn’t published, we say so.
