Heads up: we research and compare the products we recommend, and we only link to gear we would consider buying ourselves. When you buy through links on this page we may earn a commission, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
SUNLU PETG Filament 1.75 mm, 1 kg
Description
PETG is the usual second filament: it bends before it snaps, copes with more heat than PLA and handles life outdoors. SUNLU’s version comes as 1.75 mm on a 1 kg spool, with a heat deflection temperature of 70 °C against 55 °C for its PLA.
Key specifications
| Material | PETG, 1.75 mm |
|---|---|
| Weight | 1 kg |
| Diameter tolerance | ±0.02 mm, according to SUNLU |
| Nozzle temperature | 240–260 °C, up to 300 mm/s |
| Bed temperature | 60–70 °C |
| Heat deflection temperature | 70 ± 5 °C |
| Tensile strength | 48 ± 10 MPa, according to SUNLU |
| Colour | Chosen on the listing |
Worth knowing before you buy
- The 240–260 °C range sits within the maximum nozzle temperature of every filament printer we list.
- PETG can bond very hard to smooth PEI plates: check your printer maker’s advice before the first print.
Specifications as published by SUNLU on its website and official listing, checked October 2026. Where a figure isn’t published, we say so.
