Download 9 free Mother’s Day STL files designed by The 3D Hub: standing MUM and MOM words (UK and US spellings), two heart plaques, a flower trinket dish, a flower card and photo holder, a hexagonal plant pot with its saucer and a flower keyring. Every model prints with no supports and fits a 180 × 180 mm bed.
Download all 9 files (ZIP, STL)
Printing this pack? It takes about 187 g of PLA, so one 1 kg spool of PLA covers it with plenty to spare. No printer yet? Compare the best 3D printers or start with the Bambu Lab A1 mini, which every file in this pack fits.
We designed these models ourselves and checked each file in OrcaSlicer 2.5.1 with automatic supports switched on: every mesh is closed, comes out as one part and needs no supports. We haven’t printed this pack yet, so if a part needs a tweak on your printer, tell us and we’ll update the file. The files are free to print for personal and classroom use, and you’re welcome to give the prints as presents. Please link to this page rather than re-uploading the files.
MUM or MOM
Both spellings, so you can print the one she’s called at home: MUM in the UK, MOM in the US. The words stand on a shelf; the heart plaques hang from a ribbon through their two holes.
MUM standing word
104 × 44.1 × 18 mm · about 25.2 g of PLA
UK spelling. Prints flat on its back; stand it up on its base.
Download STL
MOM standing word
104.6 × 43.7 × 18 mm · about 24.9 g of PLA
US spelling. Prints flat on its back; stand it up on its base.
Download STL
Heart plaque, MUM
100 × 90.4 × 4.4 mm · about 15.1 g of PLA
Two holes for a ribbon.
Download STL
Heart plaque, MOM
100 × 90.4 × 4.4 mm · about 15 g of PLA
Two holes for a ribbon.
Download STL
For her home
A dish for rings and earrings, a holder for a card or a printed photo (the slot is 2.2 mm wide), and a hexagonal pot with a drainage hole and a matching saucer.
Flower trinket dish
82.5 × 90 × 18 mm · about 23.7 g of PLA
For rings, earrings and hair clips, not for food.
Download STL
Flower card and photo holder
65.9 × 64 × 19.2 mm · about 22 g of PLA
The slot is 2.2 mm wide, for a card or a printed photo.
Download STL
Hexagonal plant pot
82.1 × 71.1 × 62 mm · about 42.2 g of PLA
With a drainage hole; pairs with the saucer.
Download STL
Saucer for the plant pot
86 × 74.5 × 9 mm · about 15.4 g of PLA
Three ribs keep the pot out of the water.
Download STL
For her keys
A flower keyring with a 5.2 mm hole for a split ring.
Flower keyring
40.8 × 39.6 × 4.2 mm · about 3.3 g of PLA
Download STL
Print settings
- Material: PLA is the easiest choice. Use the temperatures on your spool or given by its maker.
- Orientation: print each file exactly as it comes. No supports, and no brim on a clean plate.
- Layers and strength: 0.2 mm layers with two walls and 20 % infill. The weights above come from OrcaSlicer with those settings and a 0.4 mm nozzle; the whole pack uses about 187 g.
- Size: every model fits a 180 × 180 mm bed, the size of the Bambu Lab A1 mini‘s plate.
Two colours from one nozzle
The raised parts start at 3.0 mm on the heart plaques and the keyring, 10.0 mm on the MUM and MOM words, whose letters stand 1.4 mm proud of the outline, and 18.0 mm for the flower centre on the photo holder. Add a pause or a filament change at that height and swap colours: white details on a coloured base, as in the previews. In OrcaSlicer and Bambu Studio, right-click the layer slider in the preview to add the pause.
Gift ideas: who to give what
Mothering Sunday in the UK and Mother’s Day in the US and many other countries fall on different dates, so check the date where your mum lives before you plan your printing.
- For a mum who loves plants: the hexagonal pot and its saucer, with a small plant or a cutting already potted.
- For a mum with lots of jewellery: the flower dish for her rings and earrings.
- For a mum who keeps photos: the flower holder with a printed photo or your card in the slot.
- From children: the MUM or MOM word or a heart plaque, printed by a grown-up and coloured in or signed by the child with a paint marker.
- For everyday use: the flower keyring, in her favourite colour.
Finishing and wrapping
- Heart plaques: thread a ribbon through the two holes and tie a bow at the back to hang it.
- MUM and MOM words: they print flat on their back. Stand them up on their base once they’re cool.
- Plant pot: the 8 mm hole in the floor lets water drain into the saucer, where three ribs keep the pot out of the water. PLA is fine indoors; for a sunny windowsill or outdoors, PETG copes better with heat: see PLA vs PETG.
- Safety: the dish is for jewellery and keepsakes: PLA prints are not food-safe as printed. Keep prints away from heat and candles. Keyrings are not toys for young children.
More free files and ideas
For crafts children can make themselves, see our Mother’s Day 3D pen crafts. For presents the rest of the year, download our free STL files for gifts, and for bigger presents, see our gift ideas.
What you need to print it
Filament for the decorations and gifts, PETG for anything that sits near heat, and two printers that take every file: the A1 Combo adds the AMS lite for automatic colour changes. See all printer filament or our printers for beginners.
SUNLU SUNLU PLA Filament 1.75 mm, 1 kg
MaterialPLANet weight1 kgPart cooling fanOn View product
SUNLU SUNLU PETG Filament 1.75 mm, 1 kg
MaterialPETGNet weight1 kgDensity1.27 g/cm³ View product
Bambu Lab Bambu Lab A1 mini 3D Printer with LED Lamp Kit
Build volume180 × 180 × 180 mmMax speed500 mm/sMax acceleration10,000 mm/s² View product
Bambu Lab Bambu Lab A1 Combo 3D Printer with AMS lite
Build volume256 × 256 × 256 mmMax speed500 mm/sMax acceleration10,000 mm/s² View productCommon questions
Are these STL files free?
Yes. Print them for yourself, for a classroom or to give as presents. Please don’t sell the files or re-upload them; link to this page instead.
Why are there two versions of the word?
MUM is the usual spelling in the UK and MOM in the US. Both files are the same size and print the same way, so pick the one she’s called at home.
Does the plant pot hold water?
The pot has an 8 mm drainage hole, so water runs through into the saucer. Pour away what collects in the saucer, and use PETG rather than PLA if the pot will sit in the sun.
Do any of these models need supports?
No. We checked every file in OrcaSlicer 2.5.1 with automatic supports switched on, and none needed any. Print each file as it is oriented.
Have you printed them?
Not yet. We checked every file in OrcaSlicer (closed mesh, one part, no supports). If something doesn’t print well on your machine, tell us and we’ll fix the file.