Free Father’s Day STL Files: Desk Gifts, Keyrings and a DAD Sign

Short answer

Download 9 free Father’s Day STL files designed by The 3D Hub: a free-standing DAD sign, a desk tidy, No.1 DAD and No.1 GRANDAD keyrings, a BEST DAD medal, a desk cable organiser, a DAD’S KEYS wall plaque, a bottle-cap coaster and a tie-shaped gift tag. Every model prints with no supports and fits a 180 × 180 mm bed. Father’s Day falls on different dates in different countries, so check the date where you live before you plan the print.

Download all 9 files (ZIP, STL)

Printing this pack? It takes about 270 g of PLA, so one 1 kg spool of PLA covers it with plenty to spare. No printer yet? Compare the best 3D printers or start with the Bambu Lab A1 mini, which every file in this pack fits.

We designed these models ourselves and checked each file in OrcaSlicer 2.5.1 with automatic supports switched on: every mesh is closed, comes out as one part and needs no supports. We haven’t printed this pack yet, so if a part needs a tweak on your printer, tell us and we’ll update the file. The files are free to print for personal and classroom use, and you’re welcome to give the prints as presents. Please link to this page rather than re-uploading the files.

For his desk

Useful pieces that stay on the desk long after the day itself.

  • Father's Day STL file preview: dad desk signDAD desk sign
    124.6 × 36 × 45.2 mm · about 33.7 g of PLA
    Free-standing letters, 42 mm tall, on a base.
    Download STL
  • Father's Day STL file preview: desk tidyDesk tidy
    130 × 84 × 92 mm · about 145.8 g of PLA
    Three tall bays for pens and two low bays for small tools.
    Download STL
  • Father's Day STL file preview: desk cable organiserDesk cable organiser
    92 × 18 × 24 mm · about 16.9 g of PLA
    Five channels 6.2 mm across with a 4.2 mm opening. Prints on its side.
    Download STL
  • Father's Day STL file preview: bottle-cap coasterBottle-cap coaster
    99 × 99.3 × 5 mm · about 20.1 g of PLA
    Download STL

Keyrings, a medal and a gift tag

Small, quick prints that children can help choose the colours for.

  • Father's Day STL file preview: no.1 dad keyringNo.1 DAD keyring
    42.3 × 45.5 × 4.4 mm · about 4.2 g of PLA
    Download STL
  • Father's Day STL file preview: no.1 grandad keyringNo.1 GRANDAD keyring
    69.3 × 42.8 × 4.4 mm · about 5.5 g of PLA
    Download STL
  • Father's Day STL file preview: best dad medalBEST DAD medal
    70.4 × 81.2 × 4.2 mm · about 10.5 g of PLA
    Slot for a ribbon up to 22 mm wide.
    Download STL
  • Father's Day STL file preview: tie gift tagTie gift tag
    33.7 × 87.3 × 3.4 mm · about 4.4 g of PLA
    A gift tag shaped like a tie, 88 mm long.
    Download STL

For the hallway

A plaque by the door so the keys always end up in the same place.

  • Father's Day STL file preview: dad's keys wall plaqueDAD’S KEYS wall plaque
    150 × 78 × 6.2 mm · about 28.5 g of PLA
    Four hooks and two countersunk screw holes.
    Download STL

Print settings

  • Material: PLA is the easiest choice. Use the temperatures on your spool or given by its maker.
  • Orientation: print each file exactly as it comes. No supports, and no brim on a clean plate.
  • Layers and strength: 0.2 mm layers with two walls and 20 % infill. The weights above come from OrcaSlicer with those settings and a 0.4 mm nozzle; the whole pack uses about 270 g.
  • Size: every model fits a 180 × 180 mm bed, the size of the Bambu Lab A1 mini‘s plate.

Two colours from one nozzle

The letters and patterns start at 3.0 mm on the keyrings and the medal, 4.0 mm on the DAD sign and the coaster, 5.0 mm on the wall plaque and 2.4 mm on the tie tag. Add a pause or a filament change at that height and swap colours: white letters on a coloured base, as in the previews. In OrcaSlicer and Bambu Studio, right-click the layer slider in the preview to add the pause.

Gift ideas

  • For a dad who works at a desk: the desk tidy, the cable organiser and the coaster, printed in matching colours.
  • From the children: the BEST DAD medal on a ribbon, or a No.1 DAD keyring they can give with a card.
  • For a grandad: the No.1 GRANDAD keyring, or the DAD sign printed in his favourite colour.
  • For the wrapping: the tie-shaped tag, tied to the parcel with a ribbon through the hole in the knot.

Father’s Day isn’t on the same date everywhere, so check yours and leave a few days for printing and a reprint if needed. For more ideas, including things to print beyond this pack, see our Father’s Day 3D printing gifts and our gift ideas page.

Finishing and fitting

  • DAD sign: the holes inside the letters are pointed at the top so they print without supports. Stand it on a shelf or a desk.
  • Medal: the slot at the top takes a ribbon up to 22 mm wide.
  • Wall plaque: the two countersunk holes are 4.5 mm across. Use screws and wall plugs that suit your wall.
  • Cable organiser: the five channels are 6.2 mm across with a 4.2 mm opening. Stick it to the desk with double-sided mounting tape.
  • Coaster: PLA can soften under a very hot mug. For hot drinks, print it in PETG, which copes better with heat: see PLA vs PETG.
  • Keyrings and medal: thread a split ring or ribbon once the print has cooled. They are not toys: keep them away from young children.

More free files

For presents all year round, download our free STL files for gifts, which include initial keyrings from A to Z. For the festive season, see our free Christmas STL files, and for everyday ideas, useful things to 3D print.

What you need to print it

Filament for the decorations and gifts, PETG for anything that sits near heat, and two printers that take every file: the A1 Combo adds the AMS lite for automatic colour changes. See all printer filament or our printers for beginners.

Common questions

When is Father's Day?

It depends on the country: the date isn’t the same everywhere. Check the date where you live and start printing a few days ahead.

Are these STL files free?

Yes. Print them for yourself, for a classroom or to give as presents. Please don’t sell the files or re-upload them; link to this page instead.

Can I add a name?

Not in these files. You can write a name on the base of the DAD sign or the back of a keyring with a paint marker, or add raised letters with a 3D pen: see our guide to 3D pen letters.

Do any of these models need supports?

No. We checked every file in OrcaSlicer 2.5.1 with automatic supports switched on, and none needed any. Print each file as it is oriented; the cable organiser lies on its side.

Have you printed them?

Not yet. We checked every file in OrcaSlicer (closed mesh, one part, no supports). If something doesn’t print well on your machine, tell us and we’ll fix the file.