Easter 3D Prints: Free STL Files (Egg Cups, Bunny, Chick, Sign)

Short answer

Download 9 free Easter STL files designed by The 3D Hub: an egg cup, a bunny ears egg cup, a crown egg stand, four hanging decorations (bunny face, hatching chick, patterned egg and carrot), an egg gift tag and a standing HAPPY EASTER sign. Every model prints with no supports and fits a 180 × 180 mm bed.

Download all 9 files (ZIP, STL)

Printing this pack? It takes about 109 g of PLA, so one 1 kg spool of PLA covers it with plenty to spare. No printer yet? Compare the best 3D printers or start with the Bambu Lab A1 mini, which every file in this pack fits.

We designed these models ourselves and checked each file in OrcaSlicer 2.5.1 with automatic supports switched on: every mesh is closed, comes out as one part and needs no supports. We haven’t printed this pack yet, so if a part needs a tweak on your printer, tell us and we’ll update the file. The files are free to print for personal and classroom use, and you’re welcome to give the prints as presents. Please link to this page rather than re-uploading the files.

For the Easter table

Two egg cups with a 38 mm opening, for a medium hen’s egg, a crown stand for a painted egg, and a sign for the middle of the table. The underside of each cup rises at 40° from vertical, so it prints without supports.

  • Easter STL file preview: egg cupEgg cup
    46 × 46 × 52 mm · about 18.1 g of PLA
    Fits a medium hen’s egg. Not for food contact as printed.
    Download STL
  • Easter STL file preview: bunny ears egg cupBunny ears egg cup
    46 × 46 × 72.6 mm · about 19.6 g of PLA
    The same cup with two ears at the back.
    Download STL
  • Easter STL file preview: egg stand, crownEgg stand, crown
    42 × 42 × 16 mm · about 5 g of PLA
    Holds a decorated egg upright on the table.
    Download STL
  • Easter STL file preview: happy easter standing signHAPPY EASTER standing sign
    112.7 × 63.8 × 20 mm · about 39.4 g of PLA
    Prints flat on its back; stand it up on its base.
    Download STL

Decorations to hang

Flat shapes with a 5.2 mm hole for a ribbon: hang them on a few branches in a vase, a door handle or a basket.

  • Easter STL file preview: bunny face decorationBunny face decoration
    36 × 61.8 × 4.2 mm · about 4.1 g of PLA
    Download STL
  • Easter STL file preview: hatching chick decorationHatching chick decoration
    46 × 64.2 × 4.2 mm · about 5.2 g of PLA
    Download STL
  • Easter STL file preview: patterned egg decorationPatterned egg decoration
    48 × 64 × 4.2 mm · about 6.7 g of PLA
    Download STL
  • Easter STL file preview: carrot decorationCarrot decoration
    34.5 × 95.5 × 4.2 mm · about 4.5 g of PLA
    Change to green at 3.0 mm for the leaves.
    Download STL

Gift tag

An egg-shaped tag with a raised border and room for a name.

  • Easter STL file preview: egg gift tagEgg gift tag
    50 × 66 × 3.4 mm · about 6 g of PLA
    Download STL

Print settings

  • Material: PLA is the easiest choice. Use the temperatures on your spool or given by its maker.
  • Orientation: print each file exactly as it comes. No supports, and no brim on a clean plate.
  • Layers and strength: 0.2 mm layers with two walls and 20 % infill. The weights above come from OrcaSlicer with those settings and a 0.4 mm nozzle; the whole pack uses about 109 g.
  • Size: every model fits a 180 × 180 mm bed, the size of the Bambu Lab A1 mini‘s plate.

Two colours from one nozzle

The raised parts start at 3.0 mm on the decorations, 2.4 mm on the tag and 12.0 mm on the HAPPY EASTER sign, whose letters stand 1.4 mm proud of the outline. Add a pause or a filament change at that height and swap colours. On the carrot, only the leaves are raised: print the carrot in orange and switch to green. In OrcaSlicer and Bambu Studio, right-click the layer slider in the preview to add the pause.

Gift ideas: who to give what

  • For the family breakfast: an egg cup at each place, with an egg tag on a ribbon to show whose seat is whose.
  • For grandparents: the HAPPY EASTER sign for a windowsill or a mantelpiece, or a set of hanging decorations.
  • For an egg hunt: tie a tag with each child’s name to their basket, so nobody argues over whose eggs are whose.
  • For anyone who paints eggs: the crown stand, so a decorated egg can sit upright on show.

Finishing and wrapping

  • Decorations: thread a thin ribbon through the hole. They look good in pastel colours with a white second colour for the details.
  • Egg tag: write the name with a fine paint marker once the tag has cooled.
  • HAPPY EASTER sign: it prints flat on its back. Stand it up on its base once it’s cool.
  • Egg cups: they are made for display: painted or decorated eggs, or chocolate eggs in their foil. PLA prints are not food-safe as printed, as tiny gaps between layers can trap food, and PLA softens with heat, so don’t use them for freshly boiled eggs. Wipe them clean rather than putting them in the dishwasher.
  • Safety: small decorations are not toys for young children. Keep prints away from heat and candles.

More free files and ideas

For crafts to do with children, see our Easter 3D pen ideas. For presents the rest of the year, download our free STL files for gifts, and for bigger presents, see our gift ideas.

What you need to print it

Filament for the decorations and gifts, PETG for anything that sits near heat, and two printers that take every file: the A1 Combo adds the AMS lite for automatic colour changes. See all printer filament or our printers for beginners.

Common questions

Are these STL files free?

Yes. Print them for yourself, for a classroom or to give as presents. Please don’t sell the files or re-upload them; link to this page instead.

Will an egg fit the egg cups?

The opening is 38 mm across, sized for a medium hen’s egg, which sits on the rim. Eggs vary, so for very small or very large eggs, scale the cup up or down a few per cent in your slicer.

Are the egg cups food-safe?

No, not as printed: PLA prints are not food-safe, because food can get trapped between the layers, and PLA softens with heat. Use them to display painted, decorated or foil-wrapped chocolate eggs.

Do any of these models need supports?

No. We checked every file in OrcaSlicer 2.5.1 with automatic supports switched on, and none needed any. Print each file as it is oriented.

Have you printed them?

Not yet. We checked every file in OrcaSlicer (closed mesh, one part, no supports). If something doesn’t print well on your machine, tell us and we’ll fix the file.